The use method of industrial glucose is based on different conditions of raw water. Before use, a small test can be conducted to obtain the dosage. The production is based on: solid: clean water = about 1 / 5. Mix and dissolve it first, and then add water to dilute it to a solution with a content of 2 ~ 3%. The performance characteristics of industrial glucose. The solid product of industrial glucose is pure white, white powder, which is very soluble in water

解速度快,水合作用弱.形成的礬花密實,沉降速度快.水溫變化影響小,可以滿足在流動過程中產生剪切力的要求.有效去除源水中的鋁離子以及鋁鹽混凝后水中殘余的游離態鋁離子.用藥量少,處理效果好,比其它混凝劑節約10-20%費用.

It has fast hydrolysis speed and weak hydration. The formed alum is dense and has fast sedimentation speed. The change of water temperature has little influence, which can meet the requirements of shear force in the flow process. It can effectively remove aluminum ions in the source water and the residual free aluminum ions in the water after aluminum salt coagulation. It has less dosage and good treatment effect, saving 10-20% of the cost compared with other coagulants

工業葡萄糖用做鋼鐵表面清洗劑:鋼鐵表面如需要鍍缽,鍍鉻,鍍錫,鍍鎳以適應用途時,如制造馬口鐵,鍍鋅板,表面鍍鉻(電度)等,其鋼坯表面均需經過嚴格清洗,使鍍層物與鋼鐵表面牢固結合,這時候其清洗藥劑中添加葡萄糖酸鈉將會達到十分理想的效果.

Industrial glucose is used as steel surface cleaning agent: when the steel surface needs to be plated with bowl, chromium, tin and nickel to meet the purpose, such as making tinplate, galvanized sheet and surface chromium plating (electricity), the billet surface needs to be strictly cleaned to make the coating firmly combined with the steel surface. At this time, the addition of sodium gluconate to the cleaning agent will achieve a very ideal effect

工業葡萄糖可以作水泥摻合劑:水泥中添加一定數量葡萄糖酸后,可增加混凝土的可塑性和強度,且有阻滯作用,即推遲混凝土的初與終凝固時期,例如添加%的葡萄糖酸,可將混凝土的初凝固時間延長10倍以上,也就是將混凝土的可塑時間從幾小時延長至幾天,而不影響其牢度.

Industrial glucose can be used as cement admixture: after adding a certain amount of gluconic acid to the cement, the plasticity and strength of concrete can be increased, and it has a blocking effect, that is, delaying the initial and final setting period of concrete. For example, adding% gluconic acid can prolong the initial setting time of concrete by more than 10 times, that is, extending the plasticity time of concrete from a few hours to a few days, Without affecting its fastness